300
This ReLamp LED fits the Arri 300-Plus Fresnel. It dims the same as a halogen lamp on an AC dimmer of your choice: even a $10 ‘lamp dimmer’ works great.
The LED Fresnel Solution
- Ultra-High Quality: 98CRI – matches Tungsten or Daylight without correction
- Less than half the cost of any comparable LED Fresnel solution.
- Brighter: 50W LED is brighter than a 300W Halogen
- Full-range dimming on your existing AC Dimmers – without color shift!
- Flicker-Free at any frame-rate
- Safe: no burns, no gloves, no fire hazard, does not explode like Halogen
- No heat on subject or talent
- Green: Easiest way to make your business sustainable.
- Reliable: Fully self-protected for a very long life.
Like a 150W HMI
One of your favorite little location lights is now a heat-free daylight source.
The upgraded light draws only 50 watts and supports external legacy AC dimmers. It focuses from 20 to 40 degrees using the fixture’s existing mechanism. It produces high-quality, daylight-balanced light with smooth, natural, spectral distribution – 94 CRI for Daylight, 98 CRI for Tungsten.
In about 5 mintues, your upgraded Fresnel will:
- Only draw 50 watts
- Cast no heat on the subject
- Dim without color shift on the same dimmers you are using now
- Be brighter than the stock Tungsten fixture
- Be the highest-quality, Daylight 300 LED Fresnel available
- Be 1/4 the cost of any comparable LED
Does it work in other fixtures?
In order to make a satisfyingly bright LED lamp replacement we have decided to make separate models of lamps for smaller fixtures. We started with the Arri 300w because of it’s popularity and size, which is large enough for our high-output LEDs. It doesn’t fit into the Mole (because it is a front loading design) or LTM Pepper (it’s too narrow).
Email us if you think we should make a version for another fixture – if there is enough interest, we will invest in it.
Let us know if you have another fixture that takes the FKW 300W halogen and we will determine if it will fit.
Ask any questions you like on this new product.
| ReLamp 300 – FKW2 LED Lamp | |
|---|---|
| Directly Replaces | FKW 300W Tungsten Halogen Lamp |
| Mounting Base | GY 9.5 |
| Power | 50W / 0.5A Accepts 95-250V |
| Dimming | Full range dimming on your existing dimmers. |
| Color Quality | Daylight Version: 95 CRI / 96 CQS / 96 TLCI Tungsten Version: 98 CRI / 97 CQS / 98 TLCI |
| Weight | .4lb |
| Fuse | 1A |
| Flicker Free | Always |